LIQUID WAX

£ 17.99

Description

Car Liquid Wax is a premium automotive polish designed to enhance your vehicle’s shine and provide
long-lasting protection. Its advanced polymer and carnauba-based formula creates a smooth, mirror
like finish that repels water, dirt, and UV rays. Suitable for all paint colors and finishes, it helps
maintain a showroom-quality appearance while protecting against oxidation, fading, and surface contaminants.

APC (All-Purpose Cleaner)

Quick Clean:
1. Lightly mist a microfiber cloth with cleaner and wipe the surface.
For Stubborn Spots.
1. Spray a small amount directly (avoiding overspray).
Let the specialist surfactant technology work for up to a minute.
Wipe over with a clean, dry microfiber cloth until no residue remains.
Repeat if necessary.

This versatile cleaning solution tackles dirt and grime with ease thanks to its advanced surfactant technology.
Safe for all surfaces in your car and even your home, this all-in-one cleaner leaves a clean finish without any sticky residue.

CITRUS PRE-WASH

Dilute to your desired effect – we recommend neat for exterior use on heavy grease areas.
5:1 on medium grease.
10:1 on light grease and interiors.
Apply the product to your chosen surface and wipe away with a clean cloth.

Citrus Degreaser is an all-purpose cleaner that can be used on virtually anything inside and outside your vehicle! Whether it be for removing carpet stains or cleaning wheel arches, our Citrus Degreaser will cope admirably.
Simply dilute with water to your requirements or to our recommended guidelines, and you’ll have a long-lasting, fast-acting, and very effective, safe cleaner.

FOAM LANCE

Connect to Pressure Washer: Attach the foam cannon to your pressure washer’s wand or gun, ensuring the connection is secure.
Adjust the Foam Output: Turn the knob on the foam cannon to adjust the foam thickness. Start with a lighter setting to check the foam consistency, then adjust it as needed.
Spray and Wash: Hold the foam cannon a few feet away from the car surface and spray the foam. Let it sit for a few minutes to loosen dirt before gently washing the car with a microfiber cloth or mitt.

Pressure Washer Requirements: Most foam cannons are designed for use with pressure washers that provide a minimum of 1,000 PSI for optimal foam production.
Cleaning Frequency: Regular use of a foam cannon helps pre-wash the vehicle by loosening dirt, reducing the risk of scratching when you wash the car.
Soap Selection: Use a pH-neutral car wash soap to avoid damaging the vehicle’s paint or protective coatings.

Risk of Surface Damage: Always ensure that the foam cannon is set to the correct pressure and foam output to avoid damaging delicate paintwork or surfaces. High pressure can scratch or mar the vehicle’s finish if used improperly.
Chemical Exposure: Always use a soap solution that is specifically designed for vehicle cleaning. Avoid using harsh chemicals or household cleaners, as they can damage the vehicle’s paint, trim, or clear coat. Wear gloves and eye protection when handling cleaning solutions to avoid skin irritation.
Water and Electrical Safety: Never use the foam cannon or pressure washer near electrical outlets or wiring. Water and electricity are a dangerous combination, so keep all electrical components dry and use a grounded, properly maintained pressure washer.