FOAM LANCE

£ 12.99

Additional Information:

  • Pressure Washer Requirements: Most foam cannons are designed for use with pressure washers that provide a minimum of 1,000 PSI for optimal foam production.

  • Cleaning Frequency: Regular use of a foam cannon helps pre-wash the vehicle by loosening dirt, reducing the risk of scratching when you wash the car.

  • Soap Selection: Use a pH-neutral car wash soap to avoid damaging the vehicle’s paint or protective coatings.

Description

Instructions for use:
  • Connect to Pressure Washer: Attach the foam cannon to your pressure washer’s wand or gun, ensuring the connection is secure.

  • Adjust the Foam Output: Turn the knob on the foam cannon to adjust the foam thickness. Start with a lighter setting to check the foam consistency, then adjust it as needed.

  • Spray and Wash: Hold the foam cannon a few feet away from the car surface and spray the foam. Let it sit for a few minutes to loosen dirt before gently washing the car with a microfiber cloth or mitt.

Additional Information:

  • Pressure Washer Requirements: Most foam cannons are designed for use with pressure washers that provide a minimum of 1,000 PSI for optimal foam production.

  • Cleaning Frequency: Regular use of a foam cannon helps pre-wash the vehicle by loosening dirt, reducing the risk of scratching when you wash the car.

  • Soap Selection: Use a pH-neutral car wash soap to avoid damaging the vehicle’s paint or protective coatings.

Warning:

  • Risk of Surface Damage: Always ensure that the foam cannon is set to the correct pressure and foam output to avoid damaging delicate paintwork or surfaces. High pressure can scratch or mar the vehicle’s finish if used improperly.

  • Chemical Exposure: Always use a soap solution that is specifically designed for vehicle cleaning. Avoid using harsh chemicals or household cleaners, as they can damage the vehicle’s paint, trim, or clear coat. Wear gloves and eye protection when handling cleaning solutions to avoid skin irritation.

  • Water and Electrical Safety: Never use the foam cannon or pressure washer near electrical outlets or wiring. Water and electricity are a dangerous combination, so keep all electrical components dry and use a grounded, properly maintained pressure washer.

Related Products

PRICE

,

Instructions For Use
  • Wash your car thoroughly using your regular car wash routine.
  • Rinse away all dirt, grime, and soap residue for best results.
  • Shake the bottle well.
  • Spray the product over a clean, wet panel, one section at a time.
  • Rinse each section with low-pressure water before continuing with the next.
  • When the entire vehicle has been treated, dry and remove any remaining water droplets with a clean microfibre.
  • NOTE! Avoid using on hot surfaces and apply in shade.
Product Description
  • Wax Rinse works on a variety of surfaces such as paint, glass, chrome, plastic, rubber and alloy wheels.
     It can also be used on other vehicles such as boats, caravans, and more.
  • Wax Rinse provides long-lasting protection from environmental elements like UV rays, dust, and road grime.
  • This not only preserves the vibrancy of your car’s paint by giving a nice shine and deeper colour but also makes future washes easier, as dirt and grime struggle to adhere to the protected surface.
Warning:
  • Causes skin irritation. (H315)
  • Causes serious eye damage. (H318)
  • Rinse eyes with water and contact your doctor.
BUY Now

PRICE

,

Instructions for Use:

  • Spray across the wheel surface and in all hard-to-reach places.
  • Let the specialist anti-fallout technology work for up to 5 minutes.
  • Watch as it changes from a colourless solution to a vibrant red as the formula breaks down contaminants.
  • Agitate with a detailing brush on ingrained contamination.
  • Jet wash off excess product.
Additional Information:
  • Thoroughly removes iron fallout, brake dust, and grime from wheels and paintwork.
  • The pH-neutral, touchless formula makes it safe and easy to use.
  • Changes colour to a vibrant red “bleed” as it works.
Warning:
  • Causes skin irritation. (H315)
  • Causes serious eye damage. (H318)
  • Rinse your eyes with water and contact your doctor.
BUY Now

PRICE

,

Instructions for Use:
  • Rinse the vehicle with water to loosen any dirt. For best results, use our Snow Foam pre-wash.
  • Add approximately 15ml (or 3 caps full) to a 10L bucket with warm water and mix the solution (a pressure washer can help with mixing).
  • Apply to paintwork using a dedicated wash mitt.
  • Rinse thoroughly with water.
Additional Information:
  • This specially formulated shampoo contains both surfactants and lubricants which give a smooth feel as you wipe exterior surfaces clean, reducing marring. Long-lasting suds help lift dirt particles safely away.
Warning:
  • Causes skin irritation. (H315)
  • Causes serious eye damage. (H318)
  • Rinse eyes with water and contact your doctor.
BUY Now