Tyre Dressing

Price range: £ 8.99 through £ 30.00

The advanced formula, enriched with PDMS, enhances the surface appearance and offers protection.
This results in tyres that look like new for longer, while also preventing the unsightly browning that can occur over time.

Description

The surface must be clean and dry prior to application.
For tyres: Spray a few light mists per tyre. Wipe the sidewall using a tyre dressing applicator.
Allow the product to dry fully before driving.
For trim: Apply with an applicator pad evenly to the surface.
Lightly buff if required.

The advanced formula, enriched with PDMS, enhances the surface appearance and offers protection.
This results in tyres that look like new for longer, while also preventing the unsightly browning that can occur over time.

SNOW FOAM

Rinse your vehicle to loosen any dirt.
Use 100-150ml in a 1L foam lance and top up with 900ml of deionized water for best results.
Apply the Snow Foam to the surface of your car going from top to bottom.
Allow the Snow Foam to dwell for 5 minutes.
Rinse thoroughly with a pressure washer to remove the suds.

A highly foaming pre-wash agent, specially formulated to deliver exceptional results.
Biodegradable formula that cleans effectively without stripping sealant or wax protection.
The thick foam clings to the car’s surface, allowing for easy removal of surface dirt.

APC (All-Purpose Cleaner)

Quick Clean:
1. Lightly mist a microfiber cloth with cleaner and wipe the surface.
For Stubborn Spots.
1. Spray a small amount directly (avoiding overspray).
Let the specialist surfactant technology work for up to a minute.
Wipe over with a clean, dry microfiber cloth until no residue remains.
Repeat if necessary.

This versatile cleaning solution tackles dirt and grime with ease thanks to its advanced surfactant technology.
Safe for all surfaces in your car and even your home, this all-in-one cleaner leaves a clean finish without any sticky residue.

FOAM LANCE

Connect to Pressure Washer: Attach the foam cannon to your pressure washer’s wand or gun, ensuring the connection is secure.
Adjust the Foam Output: Turn the knob on the foam cannon to adjust the foam thickness. Start with a lighter setting to check the foam consistency, then adjust it as needed.
Spray and Wash: Hold the foam cannon a few feet away from the car surface and spray the foam. Let it sit for a few minutes to loosen dirt before gently washing the car with a microfiber cloth or mitt.

Pressure Washer Requirements: Most foam cannons are designed for use with pressure washers that provide a minimum of 1,000 PSI for optimal foam production.
Cleaning Frequency: Regular use of a foam cannon helps pre-wash the vehicle by loosening dirt, reducing the risk of scratching when you wash the car.
Soap Selection: Use a pH-neutral car wash soap to avoid damaging the vehicle’s paint or protective coatings.

Risk of Surface Damage: Always ensure that the foam cannon is set to the correct pressure and foam output to avoid damaging delicate paintwork or surfaces. High pressure can scratch or mar the vehicle’s finish if used improperly.
Chemical Exposure: Always use a soap solution that is specifically designed for vehicle cleaning. Avoid using harsh chemicals or household cleaners, as they can damage the vehicle’s paint, trim, or clear coat. Wear gloves and eye protection when handling cleaning solutions to avoid skin irritation.
Water and Electrical Safety: Never use the foam cannon or pressure washer near electrical outlets or wiring. Water and electricity are a dangerous combination, so keep all electrical components dry and use a grounded, properly maintained pressure washer.