Wheel cleaning kit

£ 18.00

Wheel cleaning kit, cleans the dirt and grime as well as fallout. From your wheels contains 500ml bottles.

– wheel cleaner, formulated to clean your wheels and leave them looking there best

– fallout remover to remove brake dust from your wheels giving you that complete finish, also safe on body work

Description

Wheel cleaning kit, cleans the dirt and grime as well as fallout. From your wheels contains 500ml bottles.

– wheel cleaner, formulated to clean your wheels and leave them looking there best

– fallout remover to remove brake dust from your wheels giving you that complete finish, also safe on body work

Fallout Remover

Instructions for Use:

Spray across the wheel surface and in all hard-to-reach places.
Let the specialist anti-fallout technology work for up to 5 minutes.
Watch as it changes from a colourless solution to a vibrant red as the formula breaks down contaminants.
Agitate with a detailing brush on ingrained contamination.
Jet wash off excess product.

Thoroughly removes iron fallout, brake dust, and grime from wheels and paintwork.
The pH-neutral, touchless formula makes it safe and easy to use.
Changes colour to a vibrant red “bleed” as it works.

FOAM LANCE

Connect to Pressure Washer: Attach the foam cannon to your pressure washer’s wand or gun, ensuring the connection is secure.
Adjust the Foam Output: Turn the knob on the foam cannon to adjust the foam thickness. Start with a lighter setting to check the foam consistency, then adjust it as needed.
Spray and Wash: Hold the foam cannon a few feet away from the car surface and spray the foam. Let it sit for a few minutes to loosen dirt before gently washing the car with a microfiber cloth or mitt.

Pressure Washer Requirements: Most foam cannons are designed for use with pressure washers that provide a minimum of 1,000 PSI for optimal foam production.
Cleaning Frequency: Regular use of a foam cannon helps pre-wash the vehicle by loosening dirt, reducing the risk of scratching when you wash the car.
Soap Selection: Use a pH-neutral car wash soap to avoid damaging the vehicle’s paint or protective coatings.

Risk of Surface Damage: Always ensure that the foam cannon is set to the correct pressure and foam output to avoid damaging delicate paintwork or surfaces. High pressure can scratch or mar the vehicle’s finish if used improperly.
Chemical Exposure: Always use a soap solution that is specifically designed for vehicle cleaning. Avoid using harsh chemicals or household cleaners, as they can damage the vehicle’s paint, trim, or clear coat. Wear gloves and eye protection when handling cleaning solutions to avoid skin irritation.
Water and Electrical Safety: Never use the foam cannon or pressure washer near electrical outlets or wiring. Water and electricity are a dangerous combination, so keep all electrical components dry and use a grounded, properly maintained pressure washer.

SHOW WAX

Clean the Surface: Wash and dry your vehicle thoroughly before applying the show wax. Ensure there is no dirt, grime, or water spots left on the surface.
Apply the Wax: Using a clean, soft applicator pad or microfiber cloth, apply a thin layer of show wax to the surface of the vehicle in small sections. Apply in circular motions, working in one section at a time.
Allow to Dry: Let the wax sit for a few minutes (or according to manufacturer instructions) until it starts to haze or dry on the surface. Do not let it dry for too long, as it could be difficult to buff off.
Buff Off: Using a clean, dry microfiber cloth, buff the surface in circular motions, removing the excess wax and revealing the shine. Ensure all excess wax is removed to avoid streaks or residue.
Final Touch: After buffing, you can apply a second layer of wax if desired for an even more enhanced finish, especially on darker-colored vehicles.

Duration of Protection: Show wax provides a layer of protection that typically lasts for a few weeks to a few months, depending on the type of wax used and environmental conditions. Frequent washing may shorten the duration of protection.
Different Types of Show Wax: There are various types of show waxes, including paste, liquid, and spray wax. Choose the one that best suits your vehicle’s needs and your personal preference for application and removal.
Enhancing Shine: Show wax not only protects the paint but also enhances its depth and gloss, giving your vehicle a glossy, mirror-like finish. For best results, use the wax after thoroughly washing and drying your car.

Avoid Over-Application: Applying too much wax can lead to difficulty buffing off the excess and can create streaks or residue on the surface. Always apply in thin, even layers.
Test Before Full Application: Always perform a spot test on a small, inconspicuous area of your vehicle to ensure compatibility with the surface and to avoid any adverse reactions, especially on newer or delicate paint finishes.
Keep Away from Interior Surfaces: Show wax is intended for exterior use only. Avoid getting the product on your car’s interior surfaces (like dashboard, seats, or carpet) as it can leave a sticky residue or cause discoloration.