SHOW WAX

Description

Clean the Surface: Wash and dry your vehicle thoroughly before applying the show wax. Ensure there is no dirt, grime, or water spots left on the surface.
Apply the Wax: Using a clean, soft applicator pad or microfiber cloth, apply a thin layer of show wax to the surface of the vehicle in small sections. Apply in circular motions, working in one section at a time.
Allow to Dry: Let the wax sit for a few minutes (or according to manufacturer instructions) until it starts to haze or dry on the surface. Do not let it dry for too long, as it could be difficult to buff off.
Buff Off: Using a clean, dry microfiber cloth, buff the surface in circular motions, removing the excess wax and revealing the shine. Ensure all excess wax is removed to avoid streaks or residue.
Final Touch: After buffing, you can apply a second layer of wax if desired for an even more enhanced finish, especially on darker-colored vehicles.

Duration of Protection: Show wax provides a layer of protection that typically lasts for a few weeks to a few months, depending on the type of wax used and environmental conditions. Frequent washing may shorten the duration of protection.
Different Types of Show Wax: There are various types of show waxes, including paste, liquid, and spray wax. Choose the one that best suits your vehicle’s needs and your personal preference for application and removal.
Enhancing Shine: Show wax not only protects the paint but also enhances its depth and gloss, giving your vehicle a glossy, mirror-like finish. For best results, use the wax after thoroughly washing and drying your car.

Avoid Over-Application: Applying too much wax can lead to difficulty buffing off the excess and can create streaks or residue on the surface. Always apply in thin, even layers.
Test Before Full Application: Always perform a spot test on a small, inconspicuous area of your vehicle to ensure compatibility with the surface and to avoid any adverse reactions, especially on newer or delicate paint finishes.
Keep Away from Interior Surfaces: Show wax is intended for exterior use only. Avoid getting the product on your car’s interior surfaces (like dashboard, seats, or carpet) as it can leave a sticky residue or cause discoloration.

Instructions for Use:

Either use neat or dilute as required (up to a ratio of 4:1).

Spray the Wheel Cleaner directly on your alloy wheel, ensuring the entire surface is covered.

Allow the product to dwell for up to 2 minutes, during which time you can agitate with a soft-bristled wheel brush.

Jet wash the wheel thoroughly with water to remove the cleaner and any dirt.

Dry the wheel with a microfiber cloth to prevent water spots.

Repeat if necessary.